Laticrete 254 Platinum Grey - 50 lb Bag

Cheap Laticrete 254 Platinum Grey - 50 lb Bag Review

Laticrete 254 Platinum Grey - 50 lb Bag Feature

• 254 Platinum the ultimate one-step, polymer-fortified thin-set that provides unsurpassed strength.
• Far exceeding all ANSI A118.4 and ANSI A118.11 strength requirements.
• Ideal for interior & exterior applications on virtually all substrates & applications.
• Increases productivity with long open time; flexibility that results in fast, accurate installations
• Easy to trowel mortar assures proper coverage on both the substrates & the veneer.

Laticrete 254 Platinum Grey - 50 lb Bag Overview

No need to worry with porcelain tile, even in the most difficult projects. The exceptional bond strength and easy workability of LATICRETE 254 Platinum makes this multipurpose thin-set the ultimate adhesive for difficult to bond porcelain tiles as well as glass mosaics and large format glass tile. Inhibits the growth of stain-causing mold and mildew in substrates with Microban® antimicrobial protection.50 lb bagApproximate Coverage:* 80-95 ft2 /50 lb bag (7.4-8.8 m²/22.7 kg bag) with 1/4" x 1/4" (6 mm x 6 mm) notched trowel.* 60-70 ft2/ 50 lb bag (5.6-6.5 m²/22.7 kg bag) with 1/4" x 3/8" (6 mm x 9 mm) notched trowel.* 40-45 ft2/ 50 lb bag (3.7-4.2 m²/22.7 kg bag) with 1/2" x 1/2" (12 mm x 12 mm) notched trowel.Coverage will vary depending on trowel notch size, type and size of tile and substrate.Uses Excellent for exterior and underwater applications, superior bond to exterior glue plywood and concrete. The ultimate thin-set for porcelain and glass tiles.Advantages:- Contains Microban® antimicrobial protection to inhibit the growth of stain causing mold and mildew in the substrate.- Exceeds ANSI A118.4 Shear Bond Strength Requirements & ANSI A118.11.- Ultimate adhesion for porcelain and glass tiles.- Incredible bond to exterior glue plywood and concrete*.- Superior for exterior and submerged applications.- High shear bond strength.- Smooth creamy formula.- 10 Year Warranty**.* See limitations.** When used as part of the LATICRETE® 10 Year System Warranty DS 230.12.Suitable Substrates:- Exterior glue plywood*- Cement terrazzo- Properly prepared vinyl tile*- Cement backer boards**- Concrete/masonry- Gypsum wallboard*- Concrete block- Gypsum plaster*- Cement mortar beds- Plastic laminate*- Non-water soluble cut-back adhesive*- Cement terrazzo- Existing ceramic tile and stone* Interior use only.** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.



*** Product Information and Prices Stored: Apr 18, 2010 16:14:14